Swayam Single Phase and Three Phase Digital DOL Starter With GSM Mobile Starter(2G&4G)
Single Phase and Three Phase Digital DOL Starter With GSM Mobile Starter(2G&4G)
Specifications
1) You can control your motor through calls and messages anywhere in the world.
2) In case of phase fault, phase reversal, unbalance in phase, and other technical signs, immediately stop the motor and notify you by call and message.
3) 3 CT coils provide precise reverse adjustment as well as an automatic motor starting timer for reverse intervals.
4) Digital display shows voltage, current, dimming range as well as technical faults.
5) Self-locking system allows you to recover the mobile auto if it is stolen.
6) The motor can be turned on and off automatically according to the time you set.
7) The dashcam works like a simple auto if it gets a tantric sign.
8) 24-hour battery backup.
9) ON DELAY time of DOL and STAR DELTA stator can be set.
10) If there is any fault in the motor, for example, football stuck in the mud, motor bearing jamming, 1 coil taking more current, contactor jamming due to high-low voltage, motor wire or stator misalignment, these components are informed by message and call.
11) In the event of a short phrase or starter phase fault, the motor shuts down and the circuit shuts down.
12) Can set Line Voltage Gap.
13) Message and call to notify when the power supply is smooth or interrupted.
14) Sends motor and power status from time to time.
Precautions
1. Turn off the main power supply for the starter.
2. The companies that install Mobile Auto are Jio, Airtel, BSNL, Idea, and Vodafone (VI). Check which SIM card has the best range and insert that SIM card. Also, activate the SIM card as per the company’s guidelines, and remember to recharge it every month.
3. Ensure that the Mobile Auto is configured to receive SMS and calls for any motor faults. It is crucial to maintain sufficient balance in the SIM card.
4. If the Mobile Auto has weak network coverage, use a 3-phase line wire as an antenna. Keep the sides apart and position the antenna at a higher elevation.
Connection Procedure For Starters
Here are the simplified and rephrased instructions for connecting the starter:
1. Attach the red wire (L1), yellow wire (L2), and blue wire (L3) of the main supply to their designated points.
2. Connect the red wire (M1), yellow wire (M2), and blue wire (M3) of the motor to the appropriate points
Need help with your Single Phase and Three Phase Digital DOL Starter? Contact us today!
FLUX ELECTRONICA INDIA PRIVATE LIMITED AN ISO 9001:2015 Certified Company